Product ID: HP-25, HP-100 |
|
Differential Probe 25MHz/ 100MHz ( HP-25, HP-100)
25 MHz Differential Probe Model: HP-025
1. Make floating measurements simply and safety
2. Compatible with analog or digital storage oscilloscope
3. In compliance with IEC-1010.1, IEC-1010.2-031 CAT III , Pollution
degree 2
100MHz HP-100 Differential Probe
1.Bandwidth DC to 100MHz (-3dB)
2. Input Impedance 4MΩ//7pF Accuracy +/- 2%
3. Attenuation Ratio 1/100& 1/1000
4. Input Voltage : +/- 140V(DC+Peak AC) or 100Vrms for 1/100
----------------------------------------
TECPEL CO., LTD
NO, 13, ALLEY 5, LANE 31 CHUNG-TEH STREET,
TAIPEI 110, TAIWAN, R.O.C.
E-MAIL: sales@tecpel.com Web-site: http://www.tecpel.com
TEL:2-27375866 FAX:886-2-27373343
 (HP025_100.doc)
|
 or 
25MHz Differential Probe
100MHz Differential Probes
 
or |
Specifications:
- 25 MHz HP-025 Differential Probe
- Bandwidth : DC to 25MHz (-3dB)
- Attenuation Ratio : 1/20 & 1/200
- Accuracy : +2%
- Input Impedance : 4MΩ / 10pF each side to ground
- Differential Input Range : +1400V(DC+AC peak) or 1000V rms for 1/200
- +140V(DC+AC peak) or 100V rms for 1/200
- Common Mode Range : +1400V(DC+AC peak) or 1000V rms
- Output Offset : <+5mV, -10℃ to 40℃
- Cable length : 95cm (RG58/U)
- Power Requirements : 4x AA cels or 6VDC/60mA mains adapter (not supplied)
- Dimension : 6.6" x 2.4" x 0.8" (168x62x20mm)
- Weight : 285gms (0.583 lbs)
- 100MHz HP-100 Differential Probe
- HP-100
- Bandwidth DC to 100MHz (-3dB)
- Input Impedance 4MΩ//7pF
- Accuracy +/- 2%
- Attenuation Ratio 1/100& 1/1000
- Input Voltage : +/- 140V(DC+Peak AC) or 100Vrms for 1/100
- Max Differential:+/- 1400V(DC+Peak AC) or 1000Vrms for 1/1000
- -Max. Common Mode: +/- 1400V(DC+Peak AC) or 1000Vrms for 1/100 & 1/000
- -Absolute Max. +/- 1400V(DC+Peak AC) or 1000Vrms for 1/1000 Output Voltage
- -Max. Amplitude +/- 1.4V (into 50Ω load)
- -Offset (typical) < +/- 5mV, -10 to 40 Centigrade
- -Noise (typical) 0.6mVrms
- CMRR
- -60Hz/1MHz 80dB/50dB
- Power Requirements 4 x AA cells or 6VDC/200mA mains adapter
- Weight 800gms
- Dimensions (LxWxH) 207mm x83mmx38mm
- Compliance IEC-1010 CAT Ⅲ
|
|
|
|
|
|
|
